Work Safety 24/7

Dedicated to helping businesses and individuals prioritize safety, health, and compliance in the workplace. From small startups to large corporations, safety is essential, and we're here to make it easier.

CSB releases video animation of fatal 2021 Yenkin-Majestic explosion

Inadequate testing, engineering controls, and emergency plans contributed to impact

Low Pressure, Fatal Consequence: Explosion at Yenkin-Majestic

 
CSB releases video animation of fatal 2021 Yenkin-Majestic explosion
Source: U.S. Chemical Safety and Hazard Investigation Board
The CSB showed how inadequate testing, engineering controls, and emergency plans contributed to the fatal 2021 Yenkin-Majestic Paint explosion in Columbus, Ohio in its new video.
By Work Safety 24/7 Staff 
December 9, 2025

The U.S. Chemical Safety and Hazard Investigation Board (CSB) recently released a new safety video on its investigation into the massive April 8, 2021, explosion and fire that fatally injured one worker at the Yenkin-Majestic Paint Corporation in Columbus, Ohio.

The CSB's new safety video, “Low Pressure, Fatal Consequence: Explosion at Yenkin-Majestic,” includes an animation of the incident and commentary from Sylvia Johnson, CSB board member, and Melike Yersiz, investigator-in-charge.

The CSB’s final investigation report on the incident was released Nov. 2023.

Operator inadvertently triggered failure of repaired manway

On the evening of April 7, 2021, during a batch operation to produce resin, an operator inadvertently added a flammable solvent to a low-pressure vessel called a kettle while the agitator was unexpectedly off. As a result, the solvent did not mix with the resin as intended and instead formed a liquid layer on top of the hot resin.

When the kettle’s operator discovered the agitator was off, he turned it back on. But as the agitator began mixing the hot resin with the liquid solvent layer, the solvent suddenly vaporized, increasing the pressure inside the kettle rapidly. This led to the failure of the kettle’s new manway that was installed approximately three months before the incident.

A flammable vapor cloud quickly spread throughout the facility and within minutes found an ignition source, causing a massive explosion and a large fire that burned for roughly 11 hours. One employee, Wendell Light, died during the incident, and eight other workers were injured.

Recommendations made to company, API, ASME

“The CSB’s investigation determined that Yenkin-Majestic failed to ensure the mechanical integrity of the newly installed manway, which was not adequately designed, constructed, or pressure tested. The company also lacked engineering controls that could have prevented the incident and did not have adequate emergency response preparations in place,” Johnson said in the video. “The result was a tragic accident that could have been prevented.”

The video covers three key safety issues from the CSB’s final report that contributed to the incident

  1. Mechanical integrity of low-pressure vessels
  2. Safeguard selection and the hierarchy of controls
  3. Emergency preparedness

The video also highlights safety recommendations made by the CSB to Yenkin-Majestic, the American Petroleum Institute (API), and the American Society of Mechanical Engineers (ASME).

Low Pressure, Fatal Consequence: Explosion at Yenkin-Majestic

Read the full CSB investigation report
 

More about CSB

The U.S. Chemical Safety Board (CSB) is an independent, nonregulatory federal agency that investigates the root causes of major chemical incidents. The Board does not issue citations or fines, but makes safety recommendations to companies,…

Latest in CSB

Related Topics

Regulatory   Industry Standards   News   Investigations   Media   Video   Press Release   American Petroleum Institute   ASME   CSB   Emergency Action Plan   Explosions   Fatalities   Injuries   Kettles   Pressure Hazards   Pressure Vessels   Safety Management   Test   Yenkin–Majestic Paint Corporation   All topics
 

Subscribe

Subscribe to our FREE magazine, FREE email newsletters or both!

Join our Safety Briefing newsletter and get safety news across logistics, warehousing, manufacturing, con­struc­tion, and other high-risk environments. Get the latest regulatory updates, alerts, safety products, equipment and training, and analysis.

Subscribe today

 
 

Editors’ Picks

ANSI/ISEA update Z308.1 First Aid standard
Z308.1-2026 includes guidance on bilingual guides, CPR & AED preparedness, mobile work kits, supplemental bleeding control, naloxone, and tourniquets.
NSC Safety 2026 Day 3 Photo Recap: Wednesday, September 16
Wrapping up the 2026 NSC Safety Expo, our team visited a few more booths worth mentioning. Check out the slideshow to learn more about the education,…
NSC Safety 2026 Day 2 Photo Recap: Tuesday, September 15
Tuesday was by far the busiest day of the show. Check out the slideshow to learn more about the products we found, from helmets and harnesses to footwear and…
PHOTOS: PIP Global Safety demonstrates purpose-built innovations at NSC…
PIP Global Safety is “Disrupting the Safety Market” through purpose-built gloves, women’s PPE, multi-hazard workwear, lifelines, impact/fall detection, and…