Work Safety 24/7

Dedicated to helping businesses and individuals prioritize safety, health, and compliance in the workplace. From small startups to large corporations, safety is essential, and we're here to make it easier.
Hazcom / GHS Revision 7: OSHA's new labeling and SDS rules take effect in stages through 2028. Complete coverage

How to keep your SDS compliant during OSHA’s Hazcom update

Key changes to monitor and what triggers downstream action

How to keep your SDS compliant during OSHA’s Hazcom update
Source: Illustration created using Claude AI
Learn how to keep SDSs compliant under OSHA’s 2024 Hazcom update: Phase One and Two deadlines, key Appendix D changes, and steps for manufacturers and employers.
By Donald Halsing 
November 17, 2026

Whether you manufacture, import, distribute, or use chemicals in your operations, both upstream and downstream organizations need to obtain, update, or replace their safety data sheets (SDSs) to comply with OSHA’s 2024 Hazard Communication Standard (HCS 2024).

This explainer lists compliance deadlines, pinpoints specific changes to flag when updating or reviewing documents, and also provides some common-sense best practices to keep your SDS compliant beyond the current rule change.

Enforcement deadlines for SDSs

According to OSHA Inspection Directive CPL 02-02-079, changes will be enforced in two phases, with separate deadlines for substances and mixtures.

Organizations may follow either HCS 2012 or HCS 2024 until each specified compliance date.

Phase One: New hazard evaluation and updating

Phase One applies to manufacturers and importers, distributors passing chemical shipments through their systems, and any employer that classifies chemicals itself.

These groups evaluate chemicals for new hazards, then must ensure their SDSs comply with HCS 2024.

  • The deadline to update SDSs for substances is May 19, 2026.
  • The deadline to update SDSs for mixtures is Nov. 19, 2027.

Phase Two: Local program updates

Phase Two applies to all employers, including manufacturers, importers, and distributors in their own facilities, as well as downstream organizations using chemicals in their operations.

There is no calendar deadline for SDSs in Phase Two. The duty is triggered by receipt: when an updated SDS arrives, replace the older version in your SDS binder or system, and keep the most recent version you’ve received for each hazardous chemical.

Reviewing new sheets for accuracy gaps and compliance inconsistencies is good practice. You aren’t required to contact suppliers for new SDSs on products you already hold one for, but if you order a product after its SDS has been updated, you’ll need the new version.

Superseded SDSs may need to be kept as exposure records under 29 CFR §1910.1020.

Operations where workers only handle sealed containers, such as warehousing, marine cargo handling, and retail, have a limited requirement: maintain copies of SDSs received, and obtain one as soon as possible if an employee requests it for a sealed container that arrived without one.

Specific changes to SDSs under HCS 2024

Ensure these three key changes are reflected in any updated SDSs you produce or receive:

  • Changes to specific SDS sections: Through Appendix D, OSHA revised instructions for eight of the 16 SDS sections (Sections 1, 2, 3, 8, 9, 10, 11, and 14). Changes to sections 2, 3, 9, and 11 are the principal updates bringing OSHA’s HCS into alignment with GHS.
  • New classification criteria aligned with GHS: In Appendix A, OSHA updated chapters covering skin corrosion/irritation and eye damage. In Appendix B, OSHA added a new hazard class for desensitized explosives, and expanded the flammable gas and aerosol categories.
  • Trade-secret concentrations: OSHA changed how trade-secret concentrations can be displayed. When a concentration is withheld as a trade secret, the SDS must use the narrowest prescribed range from the standard.

Keep in mind that OSHA still requires anyone preparing an SDS to add significant new hazard information within three months of becoming aware of it.

Actions for manufacturers, importers, and others who prepare SDSs (Phase One)

All of the changes to SDSs affect organizations that prepare them:

  • Ensure all sections meet the GHS-compliant requirements of Appendix D. Always keep all 16 headings in order, in English, and mark any subheading with no relevant information as such.
  • Reclassify explosives, flammables, aerosols, and other specific chemicals under the new criteria in Appendices A and B.
  • If you withhold concentration as a trade secret, use the narrowest prescribed range under Paragraph (i) - Trade secrets. You can combine two adjacent ranges in certain cases, and you can always give a narrower range.
  • Add new significant hazards to your SDSs within three months of becoming aware of them.
  • Send updated SDSs downstream. Provide one with the first shipment after an update, and be prepared to send updated SDSs on request from customers.

Actions for employers receiving SDSs (Phase Two)

Every employer is responsible for ensuring each of its facilities is equipped with up-to-date SDSs.

These best practices apply not only during this defined regulatory change, but every time a new chemical is introduced, a chemical is changed, or a new supplier is sourced.

In addition to change management review, periodically auditing SDSs for accuracy and accessibility can help keep workers prepared to handle chemicals safely.

The first step is obtaining and maintaining SDSs:

  • Keep an SDS in the workplace for every hazardous chemical you use, and make sure employees can get to them readily during each shift. Electronic access is fine as long as it creates no barriers.
  • Replace outdated SDSs as updated ones arrive. If you order a chemical after the manufacturer has updated its SDS, keeping only the old version in your binder isn’t compliant. However, you may need to retain superseded versions where required for employee exposure records.
  • If a new hazardous chemical arrives without an SDS, request one from the manufacturer, importer, or distributor as soon as possible. There is no duty to chase new SDSs for products you already hold one for.

As good practice, also confirm that the contents of new SDSs are consistent throughout your operations:

  • Employers can generally rely on the manufacturer’s classification, so the goal is to catch obvious gaps or inconsistencies, such as missing sections, mismatched product identifiers, or concentration ranges that look wrong. Contact the supplier if something looks wrong.
  • Check your inventory list. Your written program’s chemical list must use product identifiers that match the SDS, so confirm that revised SDSs and labels still line up.
  • Check your other programs. Evaluate SDS changes across other EHS programs, such as emissions calculations and EPCRA reporting.

Make SDSs available on request to employees’ designated representatives (such as a union), OSHA, and NIOSH.

Separately, under the EPA’s Emergency Planning and Community Right-to-Know Act (EPCRA), employers may also need to report hazardous chemicals that are used or stored, depending on quantities. This can include supplying SDSs or chemical lists to state and local emergency planning officials and the local fire department. It is also a good idea to check your local and state regulations for similar requirements.

Disclaimer: Please consult OSHA’s HCS for the most up-to-date information, as changes may have been issued since publication that are not yet reflected in this article.

Editor’s note: Claude AI was used to distill information from OSHA’s documentation in the preparation of this article.

 

More about OSHA

Latest in OSHA

About Donald Halsing

Donald Halsing

Donald Halsing is the Founding Editorial Director of Work Safety 24/7. He was formerly the Associate Editor of Robotics 24/7.

Don's experience spans the supply chain, logistics, and construction industries, having worked in both warehouse operations and land surveying. He is also a professional wedding photographer with his fiancée Ashley.

Follow Work Safety 24/7
on Facebook
on Linkedin

Related Topics

Regulatory   Government Regulations   Compliance   Training   Chemical Hazards   GHS   GHS Rev 7   Hazard Communication   Labeling   OSHA   Programs & Procedures   SDS   All topics
 

Subscribe

Subscribe to our FREE magazine, FREE email newsletters or both!

Join our Safety Briefing newsletter and get safety news across logistics, warehousing, manufacturing, con­struc­tion, and other high-risk environments. Get the latest regulatory updates, alerts, safety products, equipment and training, and analysis.

Subscribe today

 
 

Editors’ Picks

Four actions organizations must take to meet OSHA's updated Hazcom rules
OSHA’s 2024 Hazcom update requires action on SDSs, labels, written programs, and training. See who must act, what changed, and the deadlines for substances and…
How to keep your SDS compliant during OSHA’s Hazcom update
Learn how to keep SDSs compliant under OSHA’s 2024 Hazcom update: Phase One and Two deadlines, key Appendix D changes, and steps for manufacturers and employers.
OSHA Hazcom GHS 7: What actually changed on chemical labels
Find out what changed on chemical labels under OSHA’s 2024 Hazcom rule, including bulk shipments, small containers, workplace labels, and the deadlines for each.
Key points your written Hazcom program needs under OSHA's new rules
This article explains where to search for changes, and which sections of your written Hazcom program likely need to be updated to comply with OSHA’s 2024 rules.