Work Safety 24/7

Dedicated to helping businesses and individuals prioritize safety, health, and compliance in the workplace. From small startups to large corporations, safety is essential, and we're here to make it easier.
Hazcom / GHS Revision 7: OSHA's new labeling and SDS rules take effect in stages through 2028. Complete coverage

Key points your written Hazcom program needs under OSHA's new rules

How to find changes and work them into your programs

Key points your written Hazcom program needs under OSHA's new rules
Source: Illustration created using Claude AI
This article explains where to search for changes, and which sections of your written Hazcom program likely need to be updated to comply with OSHA’s 2024 rules.
By Donald Halsing 
November 17, 2026

Every employer whose workers are exposed to hazardous chemicals must maintain a written hazard communication program at each workplace.

OSHA’s 2024 Hazard Communication Standard (HCS 2024) didn’t change that requirement, but the information flowing into your program may have changed.

This explainer covers what to check and when to check for changes to keep your written Hazcom program compliant.

Enforcement deadlines for written programs

According to OSHA Inspection Directive CPL 02-02-079, changes will be enforced in two phases, with separate deadlines for substances and mixtures.

Organizations may follow either HCS 2012 or HCS 2024 until each specified compliance date.

Phase One: New hazard evaluation and updating

There is no Phase One deadline for written programs. Phase One organizations’ work on SDSs and labels (May 19, 2026 for substances, Nov. 19, 2027 for mixtures) produces the information programs must reflect.

Phase Two: Local program updates

Phase Two applies to all employers, including manufacturers, importers, and distributors in their own facilities, as well as downstream organizations using chemicals in their operations.

The directive says enforcement of written programs should not be affected by the implementation dates. But if your program needs changes based on updated information from manufacturers, importers, or distributors - update it as necessary by the following deadlines:

  • The deadline to update written programs for substances is Nov. 20, 2026.
  • The deadline to update written programs for mixtures is May 19, 2028.

Operations where workers only handle sealed containers have a limited set of requirements.

What your program must cover

Inspectors review the program against paragraphs (e), (f), (g), and (h). It must address:

  • Chemical inventory: a list of every chemical known to be present, including stored chemicals not in use, using a product identifier that matches the SDS and label. It can cover the whole facility or individual work areas
  • Non-routine tasks and unlabeled pipes: how you’ll inform employees of those hazards
  • Multi-employer worksites: how other employers get access to SDSs (you can tell them where the SDSs are kept instead of handing them over), how you’ll share precautionary measures, and how you’ll explain your labeling system
  • Labeling: who is responsible for shipped container labels and for workplace labels, a description of your labeling systems and any alternatives, and procedures to review and update label information
  • SDSs: who obtains and maintains them, how they’re kept and retrieved (including backup if electronic systems fail), what to do if an SDS doesn’t arrive with the first shipment, what to do if one looks incomplete, and how you’ll confirm an SDS is current
  • Training: how employee information and training will be provided
  • Access: employees must know how to reach the program, and it must be available to employees, their representatives, NIOSH, and OSHA on request. Paper or electronic versions work, but locked cabinets or computers count as barriers

Actions to take where HCS 2024 usually requires program edits

  • Inventory and identifiers: confirm product identifiers still match revised SDSs and labels
  • Labeling section: update descriptions of your workplace labeling system if it changed. If suppliers send bulk-shipment labels electronically, record how that works for your site, since the recipient must opt in
  • SDS procedures: record replace-on-receipt and your process for checking that SDSs are current
  • Training section: describe any new or updated training on newly identified hazards and your labeling system
  • Multi-employer information: re-check what you tell contractors about labeling and SDS access

Disclaimer: Please consult OSHA’s HCS for the most up-to-date information, as changes may have been issued since publication that are not yet reflected in this article.

Editor’s note: Claude AI was used to distill information from OSHA’s documentation in the preparation of this article.


 

 

More about OSHA

Latest in OSHA

About Donald Halsing

Donald Halsing

Donald Halsing is the Founding Editorial Director of Work Safety 24/7. He was formerly the Associate Editor of Robotics 24/7.

Don's experience spans the supply chain, logistics, and construction industries, having worked in both warehouse operations and land surveying. He is also a professional wedding photographer with his fiancée Ashley.

Follow Work Safety 24/7
on Facebook
on Linkedin

Related Topics

Regulatory   Government Regulations   Compliance   Training   News   Features   Work Safety 101   Chemical Hazards   GHS   GHS Rev 7   Hazard Communication   Labeling   OSHA   Programs & Procedures   SDS   All topics
 

Subscribe

Subscribe to our FREE magazine, FREE email newsletters or both!

Join our Safety Briefing newsletter and get safety news across logistics, warehousing, manufacturing, con­struc­tion, and other high-risk environments. Get the latest regulatory updates, alerts, safety products, equipment and training, and analysis.

Subscribe today

 
 

Editors’ Picks

Four actions organizations must take to meet OSHA's updated Hazcom rules
OSHA’s 2024 Hazcom update requires action on SDSs, labels, written programs, and training. See who must act, what changed, and the deadlines for substances and…
How to keep your SDS compliant during OSHA’s Hazcom update
Learn how to keep SDSs compliant under OSHA’s 2024 Hazcom update: Phase One and Two deadlines, key Appendix D changes, and steps for manufacturers and employers.
OSHA Hazcom GHS 7: What actually changed on chemical labels
Find out what changed on chemical labels under OSHA’s 2024 Hazcom rule, including bulk shipments, small containers, workplace labels, and the deadlines for each.
Key points your written Hazcom program needs under OSHA's new rules
This article explains where to search for changes, and which sections of your written Hazcom program likely need to be updated to comply with OSHA’s 2024 rules.