Work Safety 24/7

Dedicated to helping businesses and individuals prioritize safety, health, and compliance in the workplace. From small startups to large corporations, safety is essential, and we're here to make it easier.
Hazcom / GHS Revision 7: OSHA's new labeling and SDS rules take effect in stages through 2028. Complete coverage

Embodied AI launches physically-safe AIR humanoid cobot

Robot meets ISO 15066 cobot functional safety standard to work alongside people

Embodied AI launches physically-safe AIR humanoid cobot
Source: Embodied AI
Embodied AI’s new AIR humanoid cobot is designed to work safely alongside and learn from human workers, built to meet the ISO 15066 cobot functional safety standard.
By Work Safety 24/7 Staff 
November 13, 2026

Swiss robotics company Embodied AI unveiled AIR, a humanoid cobot built to share the factory floor with people, at Humanoid Europe 2026 Nov. 6.

AIR can take on repetitive manual tasks that change too often for conventional robots, so the people already on the line can focus on work that needs their skill.

Embodied AI went from research to an industrial humanoid in nine months, and signed contracts with major OEMs globally. AIR is now being tested with global manufacturers, and the company is starting plans for scaled production.

AIR is designed under ISO cobot functional safety standard

Research from Deloitte and The Manufacturing Institute indicates as many as 1.9 million US manufacturing jobs could go unfilled by 2033. Some 22% of manufacturers plan to use physical AI, such as humanoid robots, within two years, more than double today’s 9%. But more than 80% of factory task hours are expected to stay human-driven. Embodied AI said this opportunity is in helping those people, not replacing them.

Most humanoids today are still demonstrations, and most industrial robots are built for heavy-duty tasks, so they work behind cages, away from the people who know how to do the job best.

AIR is built to be safe and complete high-dexterity tasks that currently are still performed manually. It goes onto the factory floor as it is, next to the team already there.

  • AIR is designed with a tendon-driven architecture. Motors, gearboxes, and electronics sit in its torso. Its arms are light and moved by tendons, so they carry almost no mass and give way on contact.
  • It runs on wheels rather than legs, because factory floors are flat and wheels are more stable. Safety comes from how it is built, not from software holding it back.
  • AIR is designed under the ISO/TS 15066:2016 cobot functional safety standard

AI stack already proven in electronics manufacturing deployment

To learn and guarantee factory uptime, AIR starts every job under the control of a human operator, so it is productive from its first shift.

Every run is recorded, and Embodied AI’s own AI stack learns from those demonstrations until AIR can do the task itself, typically within a month. The operator then stays on hand to cover for anything it hasn’t seen before. What one robot learns, the next can use.

Embodied AI’s AI stack is already proven in paid factory deployments with its two-arm industrial cell. When a leading consumer electronics manufacturer tested five funded startups on a cable-handling task, none met its targets. Embodied AI met them all, reaching 98% reliability against a 90% goal.

“Hallucination of AI models is acceptable in the digital space because humans review, reject, or correct the output before acting on it. In robotics, however, incorrect actions have immediate and irreversible physical consequences. When AI is used to taking physical actions, errors can cause severe damage or endanger human lives. Safety and reliability are non-negotiable requirements of physical AI to enter the real world at scale. These are the principles that guided the design of AIR,” said Francesco Stella, co-founder and CEO of Embodied AI.

AIR’s arm design grew out of Stella’s PhD at EPFL, the Swiss Federal Institute of Technology in Lausanne. Stella previously also researched at MIT CSAIL. He co-founded the company with CTO Kai Junge and COO Max Polzin, both robotics PhDs with backgrounds at Cambridge, ETH Zurich, and EPFL.

The company is backed by Faber, which led its first round, along with TechShop, Look AI Ventures, Plug and Play, and Vento.

Learn more about ISO 15066
 

More about Embodied AI

Related Topics

Software & Technology   Artificial Intelligence   Robots   News   Press Release   ANSI   Cobots   Deployment   Embodied AI   Functional Safety   Humanoid   ISO   Labor Productivity   Robot Arm   Struck–By Hazards   Teleoperation   Test   All topics
 

Subscribe

Subscribe to our FREE magazine, FREE email newsletters or both!

Join our Safety Briefing newsletter and get safety news across logistics, warehousing, manufacturing, con­struc­tion, and other high-risk environments. Get the latest regulatory updates, alerts, safety products, equipment and training, and analysis.

Subscribe today

 
 

Editors’ Picks

Four actions organizations must take to meet OSHA's updated Hazcom rules
OSHA’s 2024 Hazcom update requires action on SDSs, labels, written programs, and training. See who must act, what changed, and the deadlines for substances and…
How to keep your SDS compliant during OSHA’s Hazcom update
Learn how to keep SDSs compliant under OSHA’s 2024 Hazcom update: Phase One and Two deadlines, key Appendix D changes, and steps for manufacturers and employers.
OSHA Hazcom GHS 7: What actually changed on chemical labels
Find out what changed on chemical labels under OSHA’s 2024 Hazcom rule, including bulk shipments, small containers, workplace labels, and the deadlines for each.
Key points your written Hazcom program needs under OSHA's new rules
This article explains where to search for changes, and which sections of your written Hazcom program likely need to be updated to comply with OSHA’s 2024 rules.