Work Safety 24/7

Dedicated to helping businesses and individuals prioritize safety, health, and compliance in the workplace. From small startups to large corporations, safety is essential, and we're here to make it easier.

Raw Materials

MSHA issues safety alert following tensioner bolt injury

December 2, 2025 · After a maintenance worker was struck and seriously injured by a spring-loaded bolt while repairing a motor, MSHA issued a safety alert including best practice to control stored energy.

UTA, OSHA, EPA partner for 2025 Oil & Gas Safety Conference

November 28, 2025 · The University of Texas at Arlington, OSHA, EPA, and industry partners will host the 2025 Oil & Gas Safety, Health, and Environmental Conference Dec. 2-3 in Houston, Texas.

Oregon OSHA presenting at 2025 Western Pulp, Paper, & Forest Products Safety & Health Conference

November 25, 2025 · The 33rd annual Western Pulp, Paper, & Forest Products Safety & Health Conference will be held Dec. 2-5 at the Holiday Inn Portland - Columbia Riverfront in Portland, Oregon.

MSHA issues safety alert to contract truck drivers

November 21, 2025 · Following a fatal rollover at a Rhode Island gravel pit, the Mine Safety & Health Administration issued a safety alert including best practice guidelines to contract truck drivers.

Maine DOL announces December 2025 free training classes

November 21, 2025 · Maine DOL’s December 2025 free training class topics include combustible dust, electrical safety, hazard identification, and OSHA 10-hour construction certification courses.

Benchmark Gensuite updates Refrigerant Leak Manager ahead of EPA rule change

November 18, 2025 · Benchmark Gensuite updated its Refrigerant Leak Manager to meet EPA Clean Air Act and American Innovation and Manufacturing Act reporting regulations effective Jan. 1, 2026.

Benchmark Gensuite Refrigerant Leak Manager

November 18, 2025 · Benchmark Gensuite’s Refrigerant Leak Manager can help organizations ensure regulatory compliance with EPA 40 CFR parts 82 & 84 recordkeeping, leak detection, and repair requirements.

J. J. Keller, ISEA launch fourth annual PPE Pain Points Survey

November 17, 2025 · Open until Dec. 1, J. J. Keller & Associates has partnered again with the International Safety Equipment Association to survey safety professionals on everyday PPE implementation challenges.

Magid, MISSION open second heat safety lab at UConn

November 17, 2025 · Magid & MISSION are supporting the new Occupational Heat Safety lab at the University of Connecticut’s Korey Stringer Institute. Added capabilities support high-altitude simulation.

Government shutdown over: what it means for safety agencies

November 14, 2025 · President Trump signed a continuing resolution Nov. 12, allowing safety agencies to resume full operations until Jan. 30. FY26 appropriations must be finalized before the new deadline.

A3, ANSI update American National Standard for Industrial Robots

November 7, 2025 · A3 published all three parts of ANSI/A3 R15.06-2025, the American National Standard for Industrial Robots. Registration is open for the 2026 International Robot Safety Conference.

How Outsight’s spatial intelligence could have protected the Louvre

October 28, 2025 · Outsight’s real-time lidar-based spatial AI can strengthen safety and security. The company explained how its spatial intelligence could have protected the Louvre from the recent heist.

CSB team to investigate Accurate Energetic Systems explosion

October 27, 2025 · ATF has finished clearing undetonated explosives and other hazardous materials from the AES site. The CSB is sending a team this week to investigate the explosion that killed 16.

AME introduces RCHX Exclusion series rod locks for extreme conditions

October 24, 2025 · AME’s new RCHX Exclusion series rod locks were re-engineered from the original AMLOK RCH slide lock to operate in submersible, extreme temp, abrasive, and corrosive chemical conditions.

Congatec completes IEC 60068 testing for compact processor

October 23, 2025 · Congatec’s compact conga-TC675r processor module was tested to meet 60068 environmental condition and IEC 61373 category 2 standard railroad shock and vibration requirements.